Frigidaire 24 in. PLD2850 Built-in Dishwasher "cancel delay wash" Questions

...cancel the 4 hour delay wash on the control pannel. it is a Kenmore Elite dishwasher model 665.1392 The 4 hour delay light is on at the control panel. How do I cancel the function? Press cancel. If ...

...light comes does same thing unplug for ten minutes plug back up press the cancel button press regular wash same thing delay lights still lights up push heavy duty no delay light but still wont ...

Delay, Cancel and Start. All the buttons, lights are red ? with the exception of Sanitized which is green as noted above. After this I hit Cancel ? only the cancel light is on (which is also the drain

...cancel the "Delay Start" option, by pressing the Cancel button. Then program the cycle and options and press Start. To start the dishwasher after the Delay time, select the cycle and options desired. ...

...delay button has a steady light. I unplugged dishwasher, I have pushed cancel, cancel and heavy duty and cancel and normal wash together. Sounds like a logic board problem. You may have to change the ...

cancel the delay start option. After this program the cycle and options and press Start again as the dishwasher will not start the wash until it reaches the delayed hour i.e. till 4hrs. If after 4 hrs

will force a reset of all programming. The pause/start button also sets the Delay Start feature which can delay the start of a wash program from 1 to 12 hours. To cancel Delay Start Press the I button

...DELAY HOURS and the CANCEL/DRAIN buttons on the electronic panel are in a state of constantly blinking and nothing is happening. I cannot get a QUICK WASH or any other command to work...help@!!!!! ...

...delay the programme start, up to a maximum of 9. E.g.: if you have selected number , the wash programme will start in 2 hours' time. To cancel the delayed start set, press the button until the number ...

wash , how do I unlock it tried hitting cancell won't work try turning it off at power point and wait 3-4 mins and turn on again at p point. some you have to hold two buttons in to cancel cycle length