Question about Frigidaire Washing Machines
reed switch go on my front loader Hello friend, thank you for your post! I see that your question is labeled under Frigidaire washer, GLTF2940ES. I have located the parts manual for your appliance and
Question about Whirlpool Washing Machines
...reed switch". The reed switch is controlled by this magnet, so that when the drawer is closed the magnet causes the reed switch to close and this tells the control board to go ahead and run the ...
...However, if panel displays “DDO” either the drawer is not closing, magnet may be missing or have a defective reed switch, which you will need to contact a professional to diagnose the
reed switch that senses the magnet this can be jumped out permanetly on the backside of the control panel where the detergent dispensor comes in is a white supository called a reed switch cut this and
reed switch to plug in and the new panel doesn't. We went on and put the board in the machine and it seemed to work fine at first. The door locks and water comes into the machine, but it only runs for
Question about Kenmore Washing Machines
...reed switch on the side of it. Sometimes this switch fails and doesn't respond to the magnetic wheel inside the flow switch. It is suppose to provide a pulse action as the wheel turns. The CCU ...
...reed switch and a magnet to send the door closed signal to the control card.If the magnet becomes dislodged you will get this code.You will need to have the magnet replaced in its proper position to ...
...a ( or should if its not falied) a magnetic reed switch which allows the washer to operate only if the drawer is closed. If you take the drawer out, and remove the front, you will see where it
...the washer has detected a problem with the dispenser drawer. Either the drawer is open and will not close properly or a further diagnosis is recommended to have a professional check the reed
39 questions posted
Usually answered in minutes!
2,660 Questions
1,146 Questions
974 Questions
650 Questions
256 Questions