Acer Aspire 4720 Notebook "monitor signal screen goes" Questions

...the monitor attached. It should then find it and stay on. there is also a function key combination (usually F5) hold down the function key and press F5 and you should get the signal on the new ...

monitor in on standby then when the laptop starts it should send a signal on the 15 pin HD VGA lead if the screen button goes green then it should work the monitor. You will then know if the internals

screen was cool. I powered off the monitor and let it sit a while. When I powered up the screen remains dark. I connected an external monitor and when I power up I get the initial Windows logo and the

...monitor to the laptop & see if you could get any display on it. If this is successful, then you might have either a faulty LCD cable or screen inverter board. The LCD cable transfers data signal ...

...monitor really cause this..to be honest i think i have a faulty graphic chip.:( It might be a bad connection on the cable supplying the screen. It can't be the graphics driver as the brightness is ...

...monitor as attached the computer screen goes for some activity and i see small flickerings in tv screen. but nothing happens.but the cable worked with my friends laptop in different computer. please ...

...monitor and try powering the signal to the display. You may have to direct the laptop to use the external by holding down the Fn key and tap the appropriate "F" key that corresponds with swapping ...

monitor. Otherwise you cannot, the VGA signal is NOT compatible with a TV's input. SOME cards have a connector that plugs into the DB15 and to the TV, but they are "Special". In saying that though you

...to transfer the signal to a monitor) when you are on the laptop with grey screen? Did you said that grey, means that there is light on the laptop, but no colors, or that tha screen is not turned