wont spin You possibly have a problem with the transmission either the gearing that connects to the motor is shot or the transmission itself is gone. There aren't any belts on the washer to check and ...
Question about Whirlpool Washing Machines
Whirlpool top load washer - grease under washplate Whirlpool WTW4850HW1 top load no agitator washer. Grinding noise during wash cycle and it wasn't agitating, otherwise everything works great. I took ...
...is very likely that the transmission needs to be replaced/repaired. Inside most top loading washer transmissions is a small part that lets the motor drive the transmission in either the agitation ...
Transmission problem Took the agitator off and the agitator shaft pulled right out of the transmission! Had been having a problem with it not spinning on spincycle and getting a burn smell. Started by
Question about Kenmore Washing Machines
Kenmore Model 110.92586210 Transmission gear oil leak I have a Kenmore Model 110.92586210. The transmission has leaked some gear oil. The machine is still working okay, but I want to replace the gear ...
I'm replacing the transmission and need to know if to remove the CVJ off the transmission. Does it snap in with clips. How is the best way to remove them? The cv shafts do snap in with clips. To ...
Question about GE Washing Machines
GE washer Model WDSR2080D5WW Transmission shaft wobbles I have a GE washer Model WDSR2080D5WW. The transmission shaft wobbles back and forth. I tried using a pipe wrench and mall hammer to loosen the ...
...is very likely that the transmission needs to be replaced/repaired. Inside most top loading washer transmissions is a small part that lets the motor drive the transmission in either the agitation ...
transmission hard to turn motor overheated Either the transmision is worn or stuck out or the motor is. Disconnect the belt from the transmission and try turning the motor, then the transmission. If ...
Whirlpool LSR8010PQ0 motor hums and leaks water Somethnig is wrong with your transmission. Since it is leaking, the seals are broken or damaged. The water leaked in your transmission. The problem with
4 questions posted
Usually answered in minutes!
2,660 Questions
1,146 Questions
974 Questions
650 Questions
256 Questions