MTX Thunder5601 300W x 1 Car Amp Mono Subwoofer Amps Car Audio Amplifier "fuse blown protection mode" Questions

...mode i then tried to see if it would work in the original vehicle but it still says protect. i checked all my wires and everything so that is not the problem. i was wondering if there is some kind of ...

...fuse is blown in amp or amp is blown in which we hope not. see if you have a warrenty if blown and send back or bring it to where you purchased it from. Disconnect all speaker connections and rca ...

...protection, it's got a problem. Hope this helps A blown speaker will trigger the protect mode, sotry to power upthe amp with the speakers disconected, If you are still in protect, then the amp is

...blown. 2nd check the inline fuse next to your car battery (if you have an inline fuse) 3rd, disconnect the speaker wires with amp on, does the light go off? 4th check your ground, this may be ok if ...

...turn the car off and back on...is the amp on? If so your subs are shorting it out, either from a frayed wire, or blown subs. If it is still in protection mode, check the fuses in the side of the

Protection Mode my dual xia5600 amp went into protect mode. I have checked the fuses and none appear to be blown. I think it got to hot and went into protect mode. How do I fix this? TRY DISCONNECTING

...blown now protect mode stayson,pretty new amp barely been used POWER IT UP WITH NO SPEAKERS CONNECTED AND NO RCA INPUTS. IF IT STILL GOES INTO PROTECTION, THEN IT WILL NEED SERVICE. WHAT YOU PROBABLY ...

...blown at the fuse under the hood. hope this helps i have the same problem i have a crunch 1500 wat amp, and i turned on the car and the subs made this little thump and then wouldnt play, ive checked ...

...fuse (not blown). Still nothing. I dont understand what it could be. Maybe there is some type of reset button? I need some help pleasE! LED Light is on, but no sound from sub at all.. Have double ...