back left speaker delivered no sound, but the right one did. I switched the surround back left and right wiring on the back of the receiver to see what would happen. The problem reversed: the surround
back to 5.1 again, it sometimes corrects itself, until the next time it cuts out. Some sound sources seem to be more problematic than others. Sometimes it behaves for a quite a while, and sometimes it
Question about Audio Players & Recorders
...sound drops out intermittently as of about 6 months ago. ...mode and back to Auto Surround would bring the center channel back. ... the push pin that holds several grey wires in place, and pull the ...
sound. The second issue you mentioned has its own answer inside. Use a "new" cd player, you can get optical cables, digital coax cables to improve the performance if you like.. I had same problem with
sound connection (in or out) can't be connected to an analog connector (in or out). Remember, Digital to Digital with a Digital capable cable; Analog to Analog with an Analog capable cable. If this is
...sound? What should I be looking for as to hooking up? My TV is a Tos, 52 in big screen and was bought in 2001 just about ready to box up and take back? Please email me at [email protected] ...
...sound to come back through the HDMI connection when watching the TV as the source, e.g. using an antenna, then both the TV and the surround sound processor need to support Audio Return Channel (ARC), ...
...should come up either on screen or on the unit itself, and tell you whether or not it is on Stereo, or Surround Sound! Hope this helps, if that doesn't fix your problem please post
Question about Onkyo Audio Players & Recorders
...sound. Help me in resloving this issue. I had the same problem and fixed it by manually setting the surround speakers changing the Level Cal to +12dB. You will immediately notice a significant ...
25 questions posted
Usually answered in minutes!
415 Questions
267 Questions
266 Questions
180 Questions
148 Questions