...or maybe a center speaker to its terminal to have them all working. 2 front speaker,2 rear speaker and 1 center speaker or subwoofer =5 and amplifier is 1 so it is a 5.1 channel.hope this
...Subwoofer are the same as in a 5.1 Channel configuration. Left and Right Surround Speakers: Place the Left and Right Surround Speakers to the left and right side of the listening position, in line ...
Question about Pioneer Audio Players & Recorders
...subwoofer, you would use the amplified terminals (connect to B-channel on the receiver). DO NOT connect anything to the line-level connection. Alternatively, you could build two unpowered subwoofers, ...
subwoofer not working on onkyo tx-sr600 i have changed the leads and subwoofer and the amp is still not driving the sub, please help kindest regards Richard Have you connected the Subwoofer out to the
...working, only way to get any bass sound is to unplug the sub cable from back of main amp and touch it on side of sub out port. Hİ,You have a very good system...one of the best of SONY..SUB ...
Question about Audio Players & Recorders
...subwoofer. I've hooked it up with 16 gauge wire on the B channel. So, the tuner thinks it is a second set of front No ideas yet. It needs to go to a subwoofer/mono out. Is this a powered subwoofer? ...
my new denon 1612 subwoofer is not working i hv purchased new denon all speaker is working but subwoofer is not working Take it back to the place of purchase, this is a manufacture defect.
...channel select options, "subwoofer' is not an option (although front R and L speakers, surround R and L speakers and center speaker ARE options ... thank you I found a manual online, and learned that ...
Subwoofer channel no longer has output speaker works but SW channel does not. started cutting out intermittently and then stopped working altogether. Has anyone experienced this or know how to fix it?
Question about Pioneer Audio Players & Recorders
...you are listening to may not have an LFE channel. • Switch the subwoofer setting in Speaker Setting on page 40 to YES or PLUS. • Switch the LFE Attenuator Setup on page 61 to LFEATT 0 or LFEATT
64 questions posted
Usually answered in minutes!
192 Questions
173 Questions
140 Questions
146 Questions
92 Questions
