Frigidaire GLTF2940E Front Load Washer "loader goes stop" Questions

...loader and then it goes out directly. Thet happens because either the water level switch/membrane switch is faulty, or because the water inlet valve is defective and stuck on open. See also : It's ...

...loader will stop and not drain. This is the second unit which has this problem. The other is about 2 years old. What is going on? sounds like the lid switch. if you have a hole that the lid finger ...

...Loader 10 years old. will not drain at all (no humming sound or anything) spin cycle starts and stops. When timer goes into drain cycle, no sound, though timer does advance. Any help would be ...

Frigidaire Front Load Washer stops mid cycle washer stops as i check to see why, It seem's to be the knob. When i touch it it goes back on somtime (temporaly) fromt loader frig

...loader, stops midway thru cycle and i have to screw around with the dial to a different position turns out it was the opening and closing the lid while trying to get it to run again. I placed a ...

...loader (has a rotary dial) will not complete cycle, it stops on drip dry but is not set to that. On delicates it goes to do the final fill but keeps dumping the water out. It will complete cycle if I ...

...loader - if it agitates and does not spin you would most likely need a new clutch or basket drive. no spin no agitate you would need a coupler, if your machine stops dead at spin cycle, no sound of ...

...loader washing machine the door will not open after a cycle. The main indicator light remains on, usually after two minutes or so the light goes off and the door is unlocked. This is normal, the unit ...

...loader fills with water but unless i shake it a couple times it wont start to move and even doing this it stops and i have to shake it again..same when it goes into spin..unless i shake it ..it wont ...

...loader washing machine will start to fill with water then it stops and reads error detected what is wrong with it? Would that mean my motor is bad? What can I do to fix it? Hi , it may just be the ...