Frigidaire GLTF1240A Front Load Washer "flood lights blinking" Questions

...blinking instead of a steady red light, which wont allow me to start the cycle . The control panel is not locked, does anyone know of a fix for this? I've also unplugged the washer for several hours ...

blinking lights and failure to start The washer drain froze and the water flooded the floor. We thawed the frozen drain and let it all dry, then we tried to use the washer and the indicator lights are

Lights On Display Had a similar problem with a WT2780 water/dryer after removing the filter cover at the bottom which caused water to flood out and somehow get into the bottom of the machine. Previous

... Thanks for any help in advance Yes this is the place, but you have to mop up the water or it would flood the place; clean out the muck from the filter and refit carefully. You have to clean your ...

...blinking light and washer will not operate. The FL error code means: Flood Condition: FL flashes if any overfill condition occurs. This condition occurs when excessive water in the tub causes the ...

...the washer runs, but the timer doesn't turn, the timer is bad and needs replacing. Do you have anti-flood hoses leading to the machine. If you do there is probably a loose tube in the back causing a ...

...cap, that is where you can hold the wet/dry vac to catch the water. Unscrew slowly so you don't get flooded, until it is unscrewed all the way out. Now pull out the trap and visually inspect the ...

...shut-off valves and check how much water flows into your bucket. (Some hoses are designed to limit flooding and restrict the flow when the hose is damaged. Replace the hoses if they are older or ...

used too much soap...miele flooded the floor....drain fault buzzer blinking what do I do? Hi, by using too much detergent the float for water leaks inside the unit would have lifted and triggered the ...