MTX Thunder 801D Car Audio Amplifier "power light red 2 wire" Questions

...blinks between the red and green power light, do i not have something right ? check that your ground wire is connected properly to both your amp and body of vehcile you may need a thicker earth ...

...light goes off but the power doesnt come on First of all, you MUST HOOK UP YOUR GROUND WIRE FIRST. You may have damaged it if you hooked your power and trigger wire first and then the ground wire. ...

...of buying this used amp but when I hooked it up to a 12 volt power supply, All I can get is a red light. Any suggestions??? Thanks, Bill Power wire is too thin or ground is not conected to bare

...power cause the red light has came on but i'm not getting no sound at all from the output of amp. i hook up another amp and it played. do i have to have a ground wire going to both as well as hot ...

light keeps flashing.. i have a power acoustik ps2 1250... and the red light keeps flashing... (protect)... how do i fix that.... my kicker was doing the same thing, and come to find out the power was

...light turns red and then turns off but the amp is still lit In Car Amplifiers have 3 main power wires: Live +12v (Fused wire direct from the + side of the cars battery) Ground (Direct to car earthing ...

...light means Protection mode.... some of the reasons a amp will go into protection mode is 1) overcurrent - the amps power wire is shorted or the amp is fried 2) thermal - will go off when the amp ...

...power light for the amp is red...right above the cooling fan are 2 indicator lights and if either of them is on your issue can normally be addressed by faulty wiring, you may have wired the speakers ...

...power light is not. help me please, hud Disconnect all speaker wires and signal cables from the amp. If it powers up normally (no protect light), the wiring needs to be checked. If it still goes into ...

...power off then on. Still red light, so it's not a input overload, and not a thermal overload. So I reconnect the RCA,s and disconnect the speaker wires and reset again, red light.... What the hell ...