...new machine?? Thanks From the symptons you describe, it could be a broken or weak spring in the door handle, which ca be fixed relatively inxpensively, that is where i would start, you can purchase ...
...weak seal.. lost about 1/2 liter. There appears to be a machined drain plug at a low point in the transmission casting but it seams to need a socket or special tool that I have never seen. I really ...
Question about Fisher and Paykel Washing Machines
...weak house breaker. Mid cycle the washer is most likely draining or spinning and if the bearing or pump locks up then the washer may draw additional amps to try to start and trip the breaker. The key ...
Question about Hotpoint Washing Machines
...weak but appear to be in good condition. If no other solution resolves the problem, then replacing the balancing springs or other moving support parts may be the best action.Another common cause for ...
...new washer. Especially if your washer is more than 10 years old, since the tub is probably starting to get rust spots, etc. Hello, your problem is going to be with the lids switch, in this machine it ...
Question about Hotpoint Washing Machines
...new one, motor looks okay, drive belt okay, suspension okay and all in place. Any pointers would be much appreciated. With best regards Gary The washer tripped the breaker once and OR after the ...
Question about Hotpoint Washing Machines
...weak, to test this theory, close the door, put your finger between the handle and the door and push the handle towards the glass, if this works then you need a new spring/handle. Please let me know, ...
new relays (black 10A/5A not 10A/10A) and this did not work still 6 weak relay clicks. I then took apart the door lock mechanism (very cool should have taken a picture) and still only got the six weak
174 questions posted
Usually answered in minutes!
2,660 Questions
1,146 Questions
974 Questions
650 Questions
256 Questions
