Frigidaire GLTF1670A Front Load Washer "lock washing machine drum" Questions

Ad

Question about Bosch Washing Machines

1 Answer

...washing was working fine and during a wash my daughter came along and pressed the buttons on the front of the machine whilst it was operating. Now the machine has stopped working. The drum will not ...

Ad

Question about Washing Machines

1 Answer

...washing machine hi. the locks on LG machines are normally 2 or 3 long bolts on the rear of the machine screwed into the back of the drum. all you can normally see are the bolt heads, with what may ...

Ad

...washing machine? While changing the door lock i wrongly took off the whole of the rubber gasket at the entrance to the machine. Having repaired the Lock i put the front of the rubber gasket back on ...

...machine starts the wash cycle. check for a faulty solenoid under the drum that activates the reverse pawl get a technician to inspect and repair. Possible that the drum release lock is not working or ...

...lock on my smart drum lg washing machine is on how doi turn it off please To TURN OFF CHILD LOCK on your LG washer, press and hold the CHILD LOCK button for 3 to 5 seconds. The washer should now have ...

Question about Hotpoint Washing Machines

1 Answer

washing machine shakes violenly at slow speed I have a WT960 Washing machine. The drum seems out of balance as it vibrates and shakes very much on slow speed 800 but balances out at higher speed 1400.

Question about Maytag Washing Machines

1 Answer

machine without causing problems You need to lock the drums and make sure that the motor and drum does not move too much during the transit as it can cause alignment issues. Make sure that the drum is

Question about Bosch Washing Machines

1 Answer

...washing machine We forgot to remove the drum lock bolts before we started the washer and it went so wild on spin cycle it put a hole in the wall. Does anyone know if this causes permanent damage to ...

Question about Frigidaire Washing Machines

1 Answer

...machine stops at the same place in the cycle as the old control board. just a guess lol but when you replaced the control board to you/him replace the wax motor lock ' check the control look for the ...

...washing machine W6551 ( drum bearing) as it in making a noise all the time.... you need to remove the drum start at the front remove front panel,four screws 2 under front,1 behind soap drawer and the ...

Not finding what you are looking for?
Frigidaire GLTF1670A Front Load Washer Logo

321 questions posted

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

J. Bradshaw

Level 2 Expert

121 Answers

Archie Ferrarini
Archie Ferrarini

Level 3 Expert

869 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...