Question about Washing Machines
...Washing Machine Replacing the wash cycle selector knob on an Ariston AV 105 washing machine can be done with the following steps: Turn off the washing machine and unplug it from the power source. ...
...washing machine is stuck on 90C. My wife only turned it round to clean the knob and now it is stuck fast. I have tried to turn it back but am afraid of breaking it off altogether if I force it. Any ...
aligned; that is, the selection on the knob does not correspond to the wash program that is running. How can I synchronize them again? The dial knob itself has slipped on the shaft. You need to remove
Question about Whirlpool Washing Machines
...knob off and the disc with the arrow on it does appear to be aligned correctly as it matches with the alignment tab. Could it be that the knob itself is simply misaligned from years of use and is ...
Question about General Electric Washing Machines
to set the wash cycle. Use the on/off knob only for starting or stopping the machine. Don't press or pull too hard on the on/off knob or you will wind up pushing the cycle selector off the timer shaft
Question about Washing Machines
How do I replace a broken water level settings switch on the front panel of my Model No. 110.88752793 Kenmore washer/dryer The knob pushes on and has a flat spot on the knob that aligns with the shaft
GE washer timer knob Timer knob will not turn timer. It will pull out and in but won't turn thr timer. The timeer can be turned using the ring behind the knob and will then operate normally. I can not
adjust level water knob water level knob is missing. how do I fix replace it. Hi Leslie, great question! Since the knob is missing, it would have to be replaced and then installed. According to the ...
...washing machine. Selection dial has seperated from the knob. How do you re-align them? Dennis Found I could unthread the knob (counterclockwise), then removed the selection plate, and its adapter. ...
Question about General Electric Washing Machines
...my Dial to my GE Washing Machine Timer ALIGN TO TIMER Most GE knobs and dials have either a flat spot or notch on the knob that aligns with a similar spot on the shaft. They can only go on one
1,216 questions posted
Usually answered in minutes!
2,660 Questions
1,146 Questions
650 Questions
256 Questions
168 Questions
