Frigidaire GLTF2940ES Front Load Washer "loose problems" Questions

Ad

Question about Hotpoint Washing Machines

1 Answer

...lovley when it goes on spin it shakes, bangs and walks across the room. Its like theres something loose. When i touch the block its very loose. Hi. I don't know if your problem has been sorted yet, ...

Ad

Question about Washing Machines

1 Answer

loose basket washing machine there was an unusual clunk and then noticed that the basket was loose,what is the problem? remove the back panel and fix the holding rod, maybe just get loose

Ad

Question about Washing Machines

1 Answer

grinding noise on spinning This problem arises due to loose drum/loose coupling or worn out/loose belt Please check the support of drum by opening the back cover. They should be firm and no play. Also

Question about Washing Machines

2 Answers

...a lot of water ! sound like a problem at the washer pump at the bottom of the washer. could be a loose hose or bad seals on pump. It could be a broken tub but unlikely. Probably a loose connection ...

...it's a major job and could be expensive. Prices can vary with the amount of replacement parts needed. A loose drum can be caused by various problems. Best get a phone quote first....Good ...

Question about Indesit Washing Machines

1 Answer

washing machine internal drum is loose on the inside and there is nothing loose. what would you say the problem was? It is going to be 1 of 2 things. 1-- Main drum bearing failure. 2-Drum shaft ...

My LG Fuzzy Logic WF-1011STP rotating plate has come loose! My LG Fuzzy Logic WF-1011STP motion plate at the bottom of the machine keeps coming loose. I have taken off the cover and tightened the ...

Question about Whirlpool Washing Machines

1 Answer

...problems with the loose agitators. Same for me. I can completely remove the agitator and I don't see any hole (s) for a set screw. Look toward the bottom end of the agitator. There should be a small ...

Question about Frigidaire Washing Machines

2 Answers

...on another question, I found that the problem was that the housing for the switch control was loose, as it did not snap shut. If you remove the lower panel and jiggle the wires, you may find ...

Question about Malber Washing Machines

1 Answer

Loose Wheel and Leak I have two problems with my Malber WD1000. 1. The nut on the wheel is loose. Every time I tighten, it just loosens up again. Any suggestions? Should I get new nut. Any idea where ...

Not finding what you are looking for?
Frigidaire GLTF2940ES Front Load Washer Logo

1,216 questions posted

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...