...fix the "door locked light" Do you know how to fix the "door locked light" being on, but door is not locked! I can not get machine to work at all like this. Hi from retired Englishman in SW ...
...door lock doesn't fix it and the wiring is ok you are only left with the control board. Hope this helps. Door unlocked, New load in. DE error still coming up. Water will not come into machine??? ...
...fix the door lock? I wanted to change the side that it opens from anyways. Will getting the door open side kit fix the problem as well for about the same amount? turn off all water to your washer run ...
Question about Washing Machines
...fix a washing machine door lock in a Hotpoint ... ? 4:21 https://www.youtube.com/watch?v=p14EEa4AYGM Jun 4, 2010 - Uploaded by eSpares For all your washing machine spare parts go to ...
...fix would be new control..lock not hard to replace remove spring holding door boot on and roll boot back 2 or 3 screws hold lock to frame remove and pull lock to opening remove wires and replace ...
...
Question about Frigidaire Washing Machines
...fix. It is a pain to get to that door lock and replace it. You will most likely need a repair person to come out and fix it. I hope this helps you, sorry to be the bearer of bad news. I hope you have ...
...and ask for Neil. It sounds like the door lock needs to be replaced. It is a simple fix requiring only a screwdriver. Contact Malber USA Consumer Hotline at 1-800-600-8913 and ask for
...Lock/Switch Assembly Check the wire harness connections to the Door Lock/Switch Assembly and Central Control Unit (CCU) Door Lock/Switch Assembly FailureTy for writing to fix ya. Best regards ...
...new door lock first. Check the wiring between the door lock and the control board. If a new door lock doesn't fix it and the wiring is ok you are only left with the control board. Hope this
1,216 questions posted
Usually answered in minutes!
2,660 Questions
1,146 Questions
650 Questions
256 Questions
168 Questions
