Question about Stoves Kitchen Ranges
loose connections or disconnected wires. Secure any loose connections and reconnect any disconnected wires, reinstall the burner base, cap and grate. Restore power to the stove and test the connection
Question about Kitchen Ranges
...burner from the stove and set the bad burner's control knob to the "OFF" position. Now plug the stove back in. If there is a problem it should trigger the breaker and shut off the stove. If you are ...
Question about Kitchen Ranges
Maytag stove model MGR7661WS propane oven burners won't stay lighted Maytag stove model MGR7661WS propane oven burners will light but turn off in about 10-seconds. Near new stove. Clean. top works
Stove igniters stay on Stove ignitors stay on. The ignitor goes off only when the cap is removed. This is happening with two burners at the same time. Hello edmontonDad, Welcome You said, Stove ...
Question about Kitchen Ranges
stove, the burner stayed the same temp. until the candy thermometer reached the right stage, you took them off and they were soft and perfect, not so with this stove. Is it the electric glasstop stove
...stove which is approx 16 years old. When I turn on the front burner, both front and back burners go on. When I turn the back burner, it stays on hi all the time. I am sure that it is not the new ...
...burner is turned on. The stove is 4 years old and the Model # is JBP64W0B5WW, Serial # DF257417Q. I would first check the infinite control switch (#WB24T10029) the part the knob slips onto. The next ...
Question about Kenmore Kitchen Ranges
Model 970-6023022 Kenmore glass top stove, my problem is the large stove top burner will intermittently stay on high even when we turn the control to low bad switch in the large burner control.
Question about Kitchen Ranges
...burner
and stove sections ..might be one of those
if all burners are affected
the gas regulator main line connection to stove
located at the back into the stove plumbing
...
Question about GE Kitchen Ranges
...stove, could the inside element have a short If the burner remains on the problem will more than like be that specific burners infinite switch is bad and not breaking the flow of electricity when ...
16 questions posted
Usually answered in minutes!
353 Questions
213 Questions
158 Questions
123 Questions
110 Questions