Frigidaire FED300AS Electric Kitchen Range "element gets red hot" Questions

element red hot!. If one does not get red hot. make a note of that switch. Some stoves create a way for a technician to know which switch is shorted and uaually it is the one that doesn't get red hot.

oven will not get hot,but when i use self cleaning oven it gets real hot If you do not see your bake element get red hot during the clean cycle then the bake element is bad and needs to be replaced.

...element didnt even get red. Sometimes broiler gets hot sometimes not we only know one solution wait until it quits then replace the elements that show open with an OHM meter . If it’s intermittent, ...

...element gets red hot when turned on any setting I have a Kenmore electric range that has a problem One of the elements gets red hot when turned on at any setting. I have replaced the switch already ...

red even when tuned up on high. hello, try changing that front element(burner)if its easily removable to another side that is working normal. If the element is still dull not heating or glowing normal

...element turns red when you put it on high, and only half heats or turns red when on low, try this. Take one of the working elements out, put it where the non-working element is, and see if it heats. ...

...element burner One of my electric elements gets red hot no matter what setting I use on the control knob. I swapped elements with the same result so I feel it is not the element but the temperature ...

...gets hot but nothing when I cut the oven on. Frigidare electric stove It sounds like your lower element is burned out. Should be easy to tell - does it turn orangey-red when you have the oven on? If ...

...red wire (i'm presuming) that connects your top and bottom element to your selector knob. Also make sure there are no internal fuses in your oven that may have blown. Please remember to turn the oven ...

...element only works partially or not getting red hot at the "Hi" setting, the problem might be with a burned out receptacle that the element plugs into. If this is the case, replace both the element ...