Garmin nuvi 250W GPS Receiver "water display" Questions

Unit turns on, but does not display my position in relation to my destination. will it sync up with satalites? or is it dead in the water?

...don't mix. You can cause more damage leaving the power applied to the unit when it is wet. Water is conductive due to the metals found in water. This can short out components and damage

...water, think it was pressure, husband left on his pocket, spot looks like a black eye with some lines from the sides The LCD display needs to be replaced. Please see this link: ...

...display screen. Unit still works fine. If you don't get any advice on opening the unit then you can evaporate any liquid back out. Suggest you put it in a warm location for a few days and let the ...

...display will flicker, do this until the pre boot mode message disappears. This seems to take a long time (60 seconds at least). 3. Once the pre boot mode message disappears release the power button ...

display has water tracks and is almost illegible Best solution to this would be to replace the screen, unless drying and cleaning the display doesn't solve the problem. Did it fall in the rain or some

...Display screen seems to run ok with no radar dome connected. Found water coming out of the cable which connects to the screen! My guess is, since inside the radar dome everything looks bone dry, that ...

...forerunner 305 recently got immersed in My forerunner 305 recently got immersed in shallow sea water, it had been wet many times before in tap water. It started cycling through various screens ...

...again: 1. Press MENU, arrow down to OVERLAY DATA and press ENT 2. Highlight the option for speed (WATER SPEED or GROUND SPEED) and press ENT 3. Highlight the REMOVE button and press ENT 4.

display without having a radar. I look forward to you reply. regards charles If you just have the transducer and no network sounder youre pretty much dead in the water. along with your transducer, you