Garmin nuvi 250W GPS Receiver "help voice back" Questions

...some that are TTS...after there loaded to your gps, go back in the voice option and change it to one of the TTS voices. if you mean you have no sound at all, post back and i will help you further. ...

...voice commands. No audio. Hit the menu buttom, go to settings, then go to volume and see if it is muted. Sounds like the mute or volume down button got inadvertantly hit and turned down or muted. If ...

help. thanks The voice may not be deleted. The procedure below gives describes the steps to get the voice back even if it's deleted. 1. Press the Volume (Speaker symbol) in the bottom right corner and

...voice is not working I can help you reset and fix your Garmin Nuvi 265W. If your Nuvi 265W is not operating properly after an update, I recommend backing up your favorites and then performing a hard ...

...help?? To change the Voice Settings Press TOOLS then SETTINGS then LANGUAGEPress VOICE LANGUAGE and select an english voice If your text is also in german Press TEXT LANGUAGE Select ENGLISH and press ...

voice. Please can you help with this promlem, or alternatively can you advise as to where I could take this to get it repaired near to NW9 (London) Many thanks The pin at the tip of the cord that goes

...back on once when i pushed the on/off button, but this time she quit and i cant get her to talk again. Thank you for contacting Garmin International. If you are not receiving verbal instructions from ...

...luck. Tried turning everything off and then back on, still no voice, or sound. Can anyone help? Maybe you have turned the FM modle on, which means the sound can only comes out from your stereo

...back to set up and check the voice box? The sound was lost after we turned on and then off the FM Transmitter. Re-selecting the Voice, under Language, fixed the problem for me. Hi, try going into ...

help you with this. Please check the voice settings of your N?vi. Starting on the main menu, select: Tools (wrench)> Settings> Language> Voice. The voice setting should be set on an option with (TTS).