Philips 42PF9431D/37 TV "tool need back" Questions

...main board. How do I do this and will I need special tools to open the rear? LT 2720 No special tools. Take off the back, and you will see the matching board you have. Make sure unit is

...i need to remove tv back cover pla If you do not know how to take the back off the set, i suggest you stay out of it. You can get a shock or hurt inside the TV. Take the unit to a repair shop. ...

what is the tool i need to unscrew wall bracket from back of tv Power screwdriver.

back black You may have dying power supply or backlight inverter board, those are the two areas you need to check. If you are going to DIY and have proper tools, electronics knowledge, and know safety

to unscrew the cable to it unless you have excellent desolder and soldering skills plus the special tools needed, you will have to replace the board that the broken connector is on. Or use a cable box

...back.Or tries websites like Shopjkimmy.com to buy a whole refurbish power supply board for the replacement. It may be in the protection shutdown mode due to sensing of the short circuits, or just ...

...back in and some time it will turn on This sounds like Electrolytic Capacitors that are needing replacing, Common fault with LCD, If you know how to use electronic tools you can open the TV and you ...

...tool for removing the back,perhaps this is what i need. My telly is dead only standby light on so i wanted to do some power supply checks. If you google it I am sure you will get the answer. ...

...back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement.If you're sound in electronics, and have all tools to ...

...need to remove the back cover to install the new board....I can walk you through it at the link below... or I can show you how to repair the board if you have tools and equipment. ...