Toshiba REGZA 47HL167 TV "back cover flat screen" Questions

...back cover of your remote, you'll find a circuit board take that off, clean the other side of that board (the one painted green) with a cotton slighty wet with rubbing alcohol as well as the black ...

back cover has to be removed but that is rare. There are four Allen Screws in the television holding the Base in position. Using an Allen Key undo the Allen Screws abd the Base will slide out from the

...back cover of the television CAUTION: To prevent damage to the CRT phosphors, immediately turn down the brightness so the line is just barely visible. If the user controls do not have enough range, ...

...back to square 1. A web search indicates that the tubes are available for purchase but does not provide the specs. This would allow me to determine tube placement. Does any one know if the tubes are ...

...flat's all from my "19.95" husky heat gun. Back to the point. The corners cut today are fans and leaded solder that won't crack or melt. hairlines cause catastrophic problems. I removed the T-con ...

cover... Peek in the back between the slots to see if you can see signs of white light ( Back panel lights). We are trying to rule out back light or inverter issues. If there is light then we can move

...TV repairers, take the TV to the nearest repairman to fix the fault for you. Also, note that TV stores a lot of current, so wait a while before opening the TV back cover.I hope this

...back on. It will eventually give out completely though. Better to get the problem addressed with the manufacturer. If you are not under warranty then I do not know what to tell you. Right now I am ...

...back cover of my sharp aquos flat screen tv? There are a bunch of screws holding the back cover on. You can either mark the screw locations and bag the screws or do what I did: Unscrew the screws, ...

...back cover of the unit try tightening the screws that hold the back cover on first if rattle still there remove back cover apply a couple of small blobs of silicone to fix the speakers into position ...