tray will not open or play at first it would show reading disc for a long time but would not play. Now the disc tray will not open at all. Hello, The reason your player keeps reading a disc and do not
tray will not open how do i manually open a sony dvd player dvp-ns400d? In order to open the disc tray.apply one of the following solutions; --- Turn off the DVD player. Unplug the power cord from the
...OPEN the tray doesn't open even though it displays OPEN, it still plays, when I turn it off and on again it displays LOAD and starts playing, why it won't open? There are little gears ...
...open the tray will not open even though the "open" light is flashing on the memorex mvd2027 player. How do I get the tray to open? I had the same problem. I opened up the unit and gently released the ...
...open the tray. for sure you already push the open button,most tray operated with a motor.check tray and gear,dont forget to check the supply power of the motor.try to check also the contact of the ...
...open tray with remote or on eject button on unit. Solution: On the bottom of the unit just below the dvd tray is a white plastic tab. Near the tab etched in the metal are the letters "OP" and and ...
...tray will not open when it is closed and the open button is pushed. Also when the tray does close the DVD turn table continues to rotate clockwise and will not stop to read a DVD. Either something is ...
...DVD button flashes, and continues in this state... The DVD tray will not open. if your dvd tray is not open you need a one inch pin or needle into hole..the hole right side .....then your dvd tray ...
tray open, but it won't budge. Hi All I had a similar problem with my fathers XBV342, my problem was that the DVD tray would open but when a disc was inserted it would close then open again time after
22 questions posted
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions