...sure the cable is not loose.press av on the tv remote till you find it. same with the vcr remote maKE SURE THAT THE DVD AV OUT ARE PLUGGED INTO NTHE TV"S AV IN 1#1, THEN SELECT LINE ONE ON YOURE ...
...TV; diagonal roll often indicates a loose ground or a defective cable/RCA connector; verify settings/configurations in all three; DVD, VHS, TV. TV should be set to AV or Video, VHS likewise to A/V ...
...loose. it took me several days, but I've finally figured out what my problem was. I could record while my tv was on, but as soon as I turned it off, there was no picture but there was sound. I had to ...
...CHECK COLOUR SYSTEM- SHOULD BE SWITCHED TO PAL I had the same prob-turned out it was just loose/bad av leads connecting to tv and a little fiddle corrected the prob, eventually replaced
...TV WAS LOOSE CHECK MPEG BOARD OF YOUR DVD PLAYER WAS DEFCTED THANK YOU 1st make sure the connections on the dvd player and device dvd connects to are correct. ie av cables red white for audio and ...
...loose AV ports on the back of tv and dvd. I would even replace the cables. Try wiggling the cables up and down, side to side while they are plugged in to see if it has any effect on the picture ...
...loose connection somewhere. Check all of your AV connections between the TV and DVD. Also make sure that the TV is set to the same AV channel as the connection you are using. E.G. if you have ...
...tv only works in av mode any other mode it wont play blue screen and says no signal and the dvd/vcr must be on also once its off it looses the time and channels You have the cable feed going through ...
...TV. Having done the above, and having confirmed that the flex/inverter is that cause of the problem, please get back to me so that I may direct you further on what to do next. Your sincerely. ...
58 questions posted
Usually answered in minutes!
1,061 Questions
920 Questions
867 Questions
724 Questions
662 Questions