Frigidaire FEF336BC Electric Kitchen Range "oven burner" Questions

...oven if burner is already lit , although more frequently the oven doesn't come up to temp , say 200-250 degrees when set to 400 , when lit by itself or with burner on. I replaced the oven igniter @ 4 ...

Dynasty range, oven does not heat up enough only the left side of the two oven burners works. 30 inch oven has only one oven tube, 36 inch oven has 2 burners in it, most comment is the oven ignitor is

...removed note the part number. Search on the internet for best price. 12.) Continue to use your oven without the burner control. 13.) Install the new burner control when received. Remember to

...oven burner won't come on Oven pilot light burns, but main oven burner won't come on. Four burners on top of range work fine...We have replaced the oven gas valve, but still have the ...

...oven. I cannot ignite the left hand back burner using the ignition button although the other burners are fine. How do I fix this? Also,the handle on the top oven door heats up when the oven is on and ...

...burner is bad? i ceertainly think that there is problem with the burner. as per the working principle of an Oven the ignitor is doin its job so the problem is with the burner please do check it

...oven is not heating up and both broiling and baking burners are working and coming up then check the temperature probe sensor and the control board. If one of the two burners is not firing check the ...

...oven works but when i try to light burners i hear clicking but the flame doesn't come on The clicking sound is from the ignition, but you do not have gas at the burner, I think it could be ...

...burner before the oven will heat up. It is almost like the burner will ignite the oven, to heat. If i do not do this, the oven itself does not heat. Check the oven ignitor, it may be bad. See if you ...

...oven have been turned on lights up. Find someone with a good electrical meter and have them test the sockets to see if there is any electricity to the burners. Also, check each burner and check for ...