Kodak EasyShare C713 Digital Camera "plate" Questions

Unable to unscrew camera from mounting plate tripod No instructions came with the tripod I purchased from Kodak for my C875. I managed to set it up seemingly correctly but when I went to remove the ...

...I can get a replacement button off of. Took back off of camera, but unable to lift a silver plate that is blocking the button location. Any suggestions? Hello, The plate you are referring to ...

...the kodak. I found some batteries have a short positive electrode that will not contact the metal plate on cameras battery door. Cheap batteries will not even turn these cameras

...BATTERY OR A REGULAR BATTERY! ..to fix this... Do as i say.. 1.) Remove battery 2.) Remove front plate (screw driver may be needed) 3.) Check all gears, make sure they are correctly fitted in

...that will require a repair. The other solution would be adding an external flash unit that has a plate that mounts to the tripod adapter which will be much cheaper than an internal repair. Best ...

...of standard oalkaline battery or other the negative terminal is smaller on these and the base plate does not seem to make the circuit

Loooking for Parts for kodak dx 7440 i'm looking for the rear or back plate for the dx 7440. does anyone know a seller or re-seller of parts for the dx 7440? bought a used non-workjing dx 7440 camera ...

the battery is ok the camera will not switch on Look at door where battery is, make sure you see metal plate. Look inside house where battery terminals are and make sure there is nothing inside

...i buy replacements!? hy...well my problem is all off the sudden all the screws from the front face plate came off and i couldnt find them,,, so i took 2 out off the back face plate and scres them to ...

...camera yet. Any advice? How hard is it? Thanks! remove all straps and battery. remove the 6.1 side plate there are 2 screws under plate 3 on bottom 1 in usb 1 above lcd . remove usb housing . gently ...