Breville CM5 Espresso Machine & Coffee Maker "tamper" Questions

Need to know the correct tamper size for a Breville 800ESXL ?? Trying to buy a steel tamper to replace plastic one.. I found this one on ebay: http://cgi.ebay.com/TERRYS-ESPRESSO-COFFEE-TAMPER-50-55mm

hi what size tamper do i need for la pavoni ebr machine about 12 yrs old thanks what size tamper do i need for this machine thanks helen Hi I have one of these in the attic, they do not come with a ...

no luck! Help! Are you tamping the coffee at all? The ground coffee needs to be compressed, using a tamper, to form a hard puck that the water will then get squeezed through. This has already happened

I am finding the coffee does not come through the brewing head unless the coffee is not tampered at all, but then it does not produce a very good coffee as it is very watery. Adjust the grind, it is ...

...on top of the gang head after you fill it with grind before you insert it into the machine- part tamper/part screen... suggestions? Tamper? Any 56mm (or even 57mm) tamper will work for the X5's ...

...I took out the grounds press assembly on the right side (1/2 turn on the door, then removed the tamper caps and turn the three locks to unlock. Remove assembly - note the position of the moving ...

...coming out diluted Coffee comes watery even after I have adjusted the grinder add more coffee ,and tamper harder ,to slow water passage through coffee,the longer it takes the more time it has to ...

...not very much play. If the screw has a pin in the middle of the star, you will need security or tamper proof torx bits. If they are tamper proof leave the repair to an