Saeco Odea Giro Plus Coffee Maker "waste basket" Questions

...the coffee and then proceeds to put the grinds in the waste basket, without pumping coffee out. What could be the problem? Sounds like the screen on the brew unit is blocked or the grind is too

...brew basket into the container below. 7) Red light indicates warmer is ON. 8) Before brewing next pot, remove brew basket from brew rails and dump filter into waste basket. Please rate this a ...

...waste-basket. No coffee.. HI There is a lever on the top of the door that has a + to the back and a - to the front. Pull the lever back 1 click to the front or - side. Your putting too much coffee in ...

...waste basket you got a nice round coffee puck i think you need to ajust the grinder its not chopping fine enough press for a coffee and put the dial down 1 like if your at 6 put 5 remmember the coffe ...

...the leveler of coofee unless the coffee is grinding in the waste basket our supposed to have like a little hockey puck fairly hard ajust it untill its like that let me now pierre merry christmas ...

...waste of coffee and milk. I have cleaned the machine with the recommended cleaner. Changed all the seals on the valve stem, a new gran portofilter, and replaced the portofilter housing seal. Thank I ...

...waste basket. Nothing in the cup. Steam function and hot water funcrion is working. The problem with the XP4050 is the two safety valves that the water goes trough on its way to the coffee head. They ...

...waste basket is empty as well. you may hear the grinder turning but it sounds like no beans are being fed or something is stopping them from falling in the chute - another possibility is the coffee ...

...basket or whatever parts are removeable, are run a brew cycle with just water  Different makers will tell you different amounts of each to use, but I usually mix about 1/2 water and 1/2 vinegar, ...

...I just removed the ball altogether, because I cant remember. Anyway, hope this helps...I just wasted an entire morning. I had the same problem, I found out that when I was using the grinding ...