Coleman Mach III Air Conditioner "45" Questions

...unlock the truck... checked all fuses under hood and rear passanger location.... all good. check #45 and # 46 take 45 and put it in 46 the low beam should work then buy a new for 45 they are about ...

Goodman HVAC unit blows the 45 amp fuses only in heat mode. This unit worked fine all summer in A/C mode. Any ideas are welcome, thanks. Check to see if you have the heavier wire ti the right breaker

My bryant air conditioner will start and run for about 45 min. The fan stops and then the breaker trips. I wait for 30 min and re-set breaker and sytem works again for about 45 min. Is this a ...

...I have a Weather King, it's about 14 years old, model number is WPLGA-036-JAZ. Thanks. if one round 45/5/370 if 2 oval 45/370 5/370 if you can get number from compressor look up and it will tell ...

...to determine what size capacitor my unit C1048BBD1VF uses for my AC unit. Is it larger then a 45 amp? Replace it with a 45 and you can hear it try to turn on but it won't. capacitors are rated ...

DeLonghi Pinguio Pac 45 Have aquired a DeLonghi Pinguino Pac 45 and would like infomation on operation and maintenance of this product as none came with it. A manual would be great too?? Thanks Louise

run capacitor i have nothing to tell me volts or mfd. any place to find spec for unit? you need a 5/45 x 370 volt mfd capacitor. I just installed one in the same type of AC today. 5 mfd is for the fan

...the start cap but all info bleed off plastic housing from uv/weather exposure it is either a 45/3 370vac or a 60/5 370vac depending on the compressor that's in the unit. if the unit serial ...

...I replace my goodman CK36-1B with to be compatible need to replace CK36-1B with what you need a 5/45 x 370 volt mfd capacitor. I just installed one in the same type of AC today. 5 mfd is for the

I have a hitachi 1.5 hp split type aircon. The aircon automatically shuts off after about 45 secs. I have to switch the breaker off and on again to be able to turn it on again and it shuts off again ...