Toshiba e-Studio DP170F Plain Paper Laser Fax "drum reset" Questions

...drum. To reset the drum counter, follow the instructions listed below. Open the front cover. Press the Options key on the control panel. The display will show "REPLACE DRUM - 1.YES 2.NO". Press 1 to ...

...counter? Thanks. after replacement of drum when you close the the cover just wait for few seconds to reset the drum machine will take one cycle. do not open lid before comletion of reset cycle

reset the drum. Anyway, here's how to do it (form the brother web site) This message would appear if the drum unit is near the end of its life. Use the drum unit until you have a print quality problem

reset the drum counter? Thanks. To reset the drum counter, follow the instructions listed below. Open the front cover. Press the Options key on the control panel. The display will show "REPLACE DRUM -

...reset Drum Life ? Hi two questions actually: 1) How to reset the drum life % on the Machine Setup menu 2) I seem tobe changing the drum 3-4x's a year, any suggestions? Thanks, ALR 1.Open the front ...

drum. To reset the drum: Open the front cover. Press the Clear/Back key. Press 1 to reset. Close the front cover, pressing firmly on each side until they click into place. The solution is the one that

...reset the "Replace Drum" message. Now the light print is probably due to the toner needing replacing. When you put in a new drum, it needs new toner too. Unfortunately, most people replace the toner ...

...drum reset on our 170F do I need to replace it right away or should I wait til it stops working? If I wait how long will it usually be? This is an advance reminder for you to order a new drum, you do ...

...drum. To reset the drum counter, follow the instructions listed below. Open the front cover. Press the Options key on the control panel. The display will show "REPLACE DRUM - 1.YES 2.NO". Press 1 to ...

...on the control panel. The display will show "REPLACE DRUM - 1.YES 2.NO". Press 1 to reset the drum count. Close the front cover. Hope this helps... This is not the correct procedure, it does not ...