Canon PowerShot SX100 IS Digital Camera "slider getting stuck" Questions

Ad

Question about Canon PowerShot Cameras

1 Answer

...slider and the lens is stuck on this lip so you cant slide it. Remove the batteries then try and slide the door open try and slide somthing between the lens and the door to free it up. This is the ...

Ad

Question about Canon PowerShot Cameras

1 Answer

...that the internal alignment is off. You might have bumped the camera with an open lens and not the sliders are out of alignment. there are very fragile pieces in there that keep the lens aligned, ...

Ad

Question about Canon PowerShot Cameras

1 Answer

...stuck in movie mode. There is a slider to switch between photo, movie and review pictures which I assume has become loose internally. It is very annoying as I usually have to turn the camera on and ...

Question about Canon PowerShot Cameras

13 Answers

...stuck (like mine was) you can tap it with a piece of plastic or blow on it. Just a piece of sand or lint in there can cause this problem. More info at ...

Question about Canon PowerShot Cameras

1 Answer

...stuck in video mode - moving the slider to "play" or "photo" mode does nothing. I can record videos but can't take pictures. The slider doesn't feel like it's come loose at all; it's actually pretty ...

Question about Canon PowerShot Cameras

1 Answer

...slider on the memory card. This would be due to puting the card in wrong or just from wear on the camera. Try securing switch on memory card to write position with either tape etc. Make sure not to ...

Question about Sony Cameras

1 Answer

...stuck off centre. It apparently happens sometimes if the camera body is dropped or knocked - it's a fault with the 'slider' on which the sensor sits. When you turn the camera on the ...

...getting prepared to un-assembly the camera it fall down out of my hands and wen i take it again it was fix, so you just have to hit or shake the camera a little bit hard. I read some of the above ...

Question about Canon PowerShot Cameras

1 Answer

slider is stuck and won't move. Hello The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed

...force the lens back in or pull it out. the alignment is off due to perhaps one of the barrels, or sliders, or even the internal rings around the lens. if anything "fell out" of the lens while you ...

Not finding what you are looking for?
Canon PowerShot SX100 IS Digital Camera Logo

483 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

old marine
old marine

Level 3 Expert

2426 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...