Frigidaire FRT21H8 Top Freezer Refrigerator "rate set" Questions

...set on the lowest setting and is still freezing things Sorry to read about your problem, I hope this helps you out. you may have a defective, temp control I suggest you contact a service company... I ...

...set to the coldest setting, you may want to check your door gasket. Try and put your mouth/lips close to the seals, your nose/lips can sense cold very well. if you feel cold coming out, replace the ...

set at medium settings. Condensation forms on top of refrigerator inside and drips to bottom of shelves where it turns to ice. the problem can be solved by turning the freezer setting to low, by which

what setting should the fridge be on? 1,2,3,4,s,6,7 due to freezer is a huge thick piece of ice! The fridge should be set to 4 or 5 the lower the # the colder. Please rate 4 thumbs for the free answer

Uses twice the advertised power This little pig use more power than my 20 year old Kenmore which is 5 times bigger. I have the data. Avanti will not talk to me (except to send me another pig). This is

...A GE MODEL GSS23WSTA Hi!! Go to this site http://www.geappliances.com/ in the Service and Support you'll find the information you need to set the temp in your Freezer. Don't forget to rate this

...set at 0 goes to 4 Sounds like the thermostat (cold control) located in the ref needs to be replaced. If this was helpful please rate me. IMUFO2 Leo Ponder Appliance-Tyler,Texas ...

set ampere on tester to 50 amper so you can read clearly,compare this on rated current on manuals or theres a description tag on backside of your freezer look for rated amperes .this should be done by

set it up to coldest point that's why it's doesn't cycle on no auto shutt off and shut on, if still not change for 12 hours still freezing up,replace thermostat by your technician,might defective.have

frig won't hold set temp keeps freezing things. Frig won't hold a set temp. It keeps freezing our food and the freezer keeps going below 0. Thermostat is defective. Thanks for using FixYa - a 4 THUMBS