Question about HP Pavilion Computers & Internet
...reset button? Also, blinking green light on backside of tower, but i believe this is normal when a/the modem is connected to the tower. Thanks. You might have a bad power supply, or something might ...
button a couple of times. (This will make sure all of the logic in the tower is reset, ) Then turn it on again. The only way to test a power supply is with a multimeter or a PSU tester, the second one
Question about HP Pavilion Computers & Internet
...button to push. Was that to reset your bios? If so, unplug the system from the wall, and carefully remove the battery from the motherboard. While it is out, push the power button on the front of the ...
...power button, the power light will flash and go out, then replace the memory as long as you know the memory is good, that is thew way that i have found to reset the mother board and clear all
...button for 30 sec , release it then replugg all the cables and check wheather it is working or not , secondly check wheather the powers supply fan on the back of tower is working or not, still it ...
...and then it worked later. Is there something internal that has to wait like a reset button? Check the power supply, if you don't hear any whir at all from the fan, power supply needs to be
...reset my surge protector and the computer wont power up. i think i need a new power supply. the power cord is working fine. Please let me know where i can find a power supply for the aspire ...
...reset button located in the back of the tower, if yours has one, push it for about 5 seconds and try it. If it doesn't work (and you don't have a tester) here are a few thoughts: Do you have an old ...
Question about ZT Group Computers & Internet
...reset button on the front, check that nothing is accidentally hitting this. Try it. If it doesn't feel correct or is a bit iffy, disconnect it from the motherboard (IT is a red/white cable on a two ...
Question about HP Pavilion Computers & Internet
button, then again and make sure the lights don't turn on or flash. This make's sure that all the power is gone from the motherboard. Before you touch the inside, make sure you touch metal, so you don
19 questions posted
Usually answered in minutes!
5,069 Questions
2,066 Questions
1,195 Questions
1,096 Questions
608 Questions