Samsung CLX-2160N All-In-One Printer "newe image unit probleme" Questions

too much yellow disbursing changed yellow imaging unit and toner and now the printer is disbursing too much yellow onto the page making the color blue greener than it is supposed to be. Sounds like ...

...image about half way down the page. We've tried a few adjustments but the problem still exists. Thanks, Jim Generally, when you have a ghosting problem, the issue is with the fusing unit. If you have ...

Mandy On the end of the image unit you will find a white bit of plastic with a small screw in the middle, make sure this screw is tight and then reinstall the units(give the units a bit of a shake too

Minolta Magicolor 3300 Imaging unit The display shows imaging unit missing. The imaging unit has been replaced with a new item but the display still shows imaging unit missing. I had the same problem.

...image unit and now i am getting an error message 9-913. HELP PLEASE This problem occurs when you buy the wrong image unit. The contact chip that is located at the bottom of the orange plastic is not ...

...image unit, bizhub 450 except i have to feed toner in to the image unit,before it print better. what could have been this problem.should i replace the image unit with a new one or what ? please ...

image. Colour is fine. Installed brand new black toner but still same problem (unit did not report that toner was empty, but worth a try). I have noted that this problem seems to be repeated by others

...that wil not stop the machine from usage was the image unit has reached end of life so the next time a service tech comes out tell them you want the new firmwareand set image unit life to ...

...Image unit mite be the problem have it replaced if it already was then mite have a bad new one also check the sensor that monitors the toner for the magenta Also pull out the magenta image unit shake ...

...image unit back in, if it prints normaly then you might have bought a defective image unit. if the black film is gritty your new drum could be causing the developer housing to arc. make sure the ...