...internal error state NOTE: This step must be performed before the printheads are re-installed. Close the printhead chute. Close the access door. Plug the power cord back in. Turn on the power. The ...
...door. To clear a jam 1. Remove all media from the output tray. 2. Check the rear access panel or the duplexer. a. Push the button on either side of the rear access panel or the duplexer, and then ...
internal components of the printer. 1. Disconnect the power cord from the back of the printer. 2. Remove the back door and remove as much jammed paper as possible. 3.Replace the back door and open the
Question about HP OfficeJet Office Equipment & Supplies
...Internal Battery is installed in the printer, unplug the printer power cord, if it is plugged in. Open the battery compartment cover and remove the battery. Wait about 10 seconds, then reinstall the ...
...door are not brock especially the rear one. Then fine a paper clip. With the machine on look on the right side of the control panel you will find a small hole. Place the paper clip inside the hole. ...
...internal test. If the printout is black and white, with no color, follow the instructions below: Open the top cover of the printer and remove the cartridges. Verify that the correct cartridges are ...
...internal test . If the printout is black and white, with no color, follow the instructions below: Open the top cover of the printer and remove the cartridges. Verify that the correct cartridges are ...
Question about HP OfficeJet Office Equipment & Supplies
...Internal Battery is installed in the printer, unplug the printer power cord, if it is plugged in. Open the battery compartment cover and remove the battery. Wait about 10 seconds, then reinstall the ...
479 questions posted
Usually answered in minutes!
2,817 Questions
1,584 Questions
1,223 Questions
991 Questions
857 Questions