...self test How is a self test done on this printer? I went to the Canon web sit and found the procedure to run the self test. Go to Support and Down Loads, enter you printer type, and then type in ...
Question about Canon PIXMA Office Equipment & Supplies
...SELF TEST ok all you need to reset the printer. You switch off the printer. When you are swithcing on the printer hold the power-button for 30 seconds that`s all, it will print the self test
self-test page 1. Make sure the printer is on and loaded with unused, plain, white paper. 2. Press the * and # keys at the same time and then press 1, 2, and 7 . 3. Press the Right-arrow key to select
Question about Canon PIXMA Office Equipment & Supplies
...they appear faded, can't find my manual How do I align the print head? How do I perform a print head cleaning? How do I perform a Print Head Deep Cleaning? How do I print a Self Test / Nozzle
Question about Canon PIXMA Office Equipment & Supplies
...Self Test from unit (iP4000) Press and hold the button. When the Power lamp blinks twice, release the button. Examine the nozzle check pattern outputhead over to ...
Question about Canon PIXMA Office Equipment & Supplies
...Please take self test page from the printer. it it is working fine your printer is working fine. After that reinstall remove the printer driver from the computer and reinstall the printer
Question about Canon PIXMA Office Equipment & Supplies
...How do I align the print head? How do I perform a print head cleaning? How do I perform a Print Head Deep Cleaning? How do I print a Self Test / Nozzle Test? How do I install the ink
...out completely and i've cleaned the heads twice.....can someone help? Try: How do I perform a print head cleaning? How do I print a Self Test / Nozzle Test? Tinted printing / Colors are not ...
Question about Canon PIXMA Office Equipment & Supplies
...PRINTING BOTTOM HALF THE MACHINE SQUEEKS How do I align the print head? How do I perform a print head cleaning? How do I perform a Print Head Deep Cleaning? How do I print a Self Test / Nozzle
self test another problem maybe the flexible signal cable between the control board and the printhead. Make sure that this cable is firmly plugged into the control board, and that it is not damaged or
1,520 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions