Canon PIXMA MP210 Photo All-In-One Printer "release paper stuck" Questions

paper path, release-it and problem solved. (Is very fragile, so use a small tool to release) Check the sensor/switch on paper tray ... thanks canon mf 5770 ...it says paper jam but i find no paper jam

...Release power button (does this turn it on or off? I did both ways) When press resume 4 times I assume power is on but I tried both ways. Get same message "paper ejection slot. Paper jam. Clear paper ...

...release button or way to feed it through and get more paper exposed? finally got the paper out by unplugging the whole thing, removing it from the shelf, and taking out the spare paper tray on the ...

...of paper or card board shove it into the feeders but make sure you push down the paper release then when it gets stuck half way turn printer off then back on and it should feed through by its ...

...paper which is stuck inside, if so carefully remove it. 7. Disconnect the printer power cord and press and hold the power button on the printer for about 15 to 20 seconds( this will release the flee ...

...Hi Normally something get stucked between the write roller and the small presure rollers. You can released it by inserting a paper in the opposite direction as the feeding direction.between the ...

paper that I can see. Please help! Try this: Hold the RESET button then press POWER. While POWER button is pressed, release the Reset. Press Reset twice (always with Power keep pressed) Release Power.

...release the flee power) and reconnect the printer and check. 8. Check and set the paper guide in the feeder to the paper size. 9. Try loading a single sheet and check if it is printing. 10. Try ...

release one part only to find it hooked up at the next snap lock. Some are hidden under or on opening covers so keep looking. The base seems to be securly attached to the workings so don't try and

...release the object. If successful it will fall out from the tray. Usually it's a coin, pen, point-protector, ruller, paper clip and so on. My printer was doing the same thing yesterday, and I also ...