Question about Canon PIXMA Office Equipment & Supplies
...and bottom cut- off abt. 3/4". any ideas? when printing a map, starts ok then slowly pulls to left a until paper jams. Verify the fuser unit exit parts,a little paper is jammed,or the roller is
paper jam keeps showing paper jam when there is no paper in the feed rollers One of your jam sensors may be stuck in the actuated position by a paper scrap or dust, giving a jam code to your printer. ...
...rollers from the paper exit side. Plastic like that from a shirt box (about 2cm wide by 20 cm long and 1 mm thick works well. I have solved this problem many times with my mx300 and it clears out ...
...the printer to the back of the exit rollers. Move it up and down first, and then slowly move it over to the right side. If something is stuck under the black guide plate, this may work it
Question about Canon PIXMA Office Equipment & Supplies
...exit tray as far as it would go to rest against the bottom row of rollers. I switched the printer off then back on again and as the rollers lifted momentarily, I pushed the sheet of plastic as far up ...
...the printer to the back of the exit rollers. 9. Move it up and down first, and then slowly move it over to the right side. If something is stuck under the black guide plate, this may work it
...the printer to the back of the exit rollers. 9. Move it up and down first, and then slowly move it over to the right side. If something is stuck under the black guide plate, this may work it
...jams paper jam. At the exit side of paper, where the inks roll in and out sideway, there is uneven sponge sticking out a little on the left side. I believe it is causing the paper jam. How can it be ...
Question about Canon PIXMA Office Equipment & Supplies
...the printer to the back of the exit rollers. 9. Move it up and down first, and then slowly move it over to the right side. If something is stuck under the black guide plate, this may work it
Question about Canon PIXMA Office Equipment & Supplies
...the printer to the back of the exit rollers. 9. Move it up and down first, and then slowly move it over to the right side. If something is stuck under the black guide plate, this may work it
640 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
