Canon PIXMA MP470 All-in-One Printer "documents keep printing double sided" Questions

...Double sided printing cannot be performed (paper size not supported). Resolution: 1. The sizes of paper suitable for double sided printing are A4, Letter, A5 and 5"x7" 2. Load correct paper size and ...

...printing, keep a double set of ink cartridges, one set full at all times. Whenever a cartridge runs out of ink, replace it IMMEDIATELY, with a new one or a refilled one. This gives the print head no ...

...printing, keep a double set of ink cartridges, one set full at all times. Whenever a cartridge runs out of ink, replace it IMMEDIATELY, with a new one or a refilled one. This gives the print head no ...

...documents, even though it is a new cartridge. I have had the printer about 4 years and use it regularly. If you have the orange tape removed from the top of the cartridge, and it's a Canon cartridge, ...

...printing as default - doesn't hold request after machines are turned off so need to keep resetting each time. Thanks Exact same problem... took a couple of hours of fiddling but seems that to get ...

...Printing Accessory (Duplexer) installed on your printer for it to print double side. If you have it installed, depending on your operating system follow the information on this page: ...

double sided and you manually have to flip paper over, the box keeps coming up and now i cannot print anything else. this document has been printed already, i've tried deleting it but it won't go away

...KEEP PRINTING OUT. PLEASE EMAIL ME OR CONTACT ME AT: [email protected] cellphone 917-597-0323. THANK YOU. SINCERLY, TOMASINA BACARELLA hi friend go to Control panel> Printer and faxes > double ...

...double vision. i dont no haw to align it or where to go to align it. Also the cartridges make alot of noise when getting ready to print and the cartridge keeps getting stuck to where i have to keep ...

...keep the front (feeding edge) of papers from curling up, but there's just enough curl in the paper from the initial printing that keeps it from feeding in properly. Any ideas? You need to try a ...