Question about HP PhotoSmart Office Equipment & Supplies
...Turn off the printer with the on/off switch and then unplug the unit. Slide the cartridge carrier to the middle of the printer by taking the top part of the belt and moving it gently to the right. ...
...turn ON C0410 Exposure Lamp turning ON at abnormal timing C0500 Heating Roller warm-up failure C0501 Fusing Pressure Roller warm-up failure C0510 Heating Roller abnormally low temperature C051 ...
...turn ON C0410 Exposure Lamp turning ON at abnormal timing C0500 Heating Roller warm-up failure C0501 Fusing Pressure Roller warm-up failure C0510 Heating Roller abnormally low temperature C051 ...
...down to shake loose anything that might jam the mechanism. Good luck! The printer head carrier had a sticking problem at the rest position.the steel bar was not sticking in the process of printing it ...
Question about HP PhotoSmart Office Equipment & Supplies
...down for a few seconds after the display reads self test please wait then release the keys For a partial ram clear, press * and 4 while turning the power on. For the Diagnostics Mode hold * and 7 ...
...down for a few seconds after the display reads self test please wait then release the keys For a partial ram clear, press * and 4 while turning the power on. For the Diagnostics Mode hold * and 7 ...
...down to snap it into place. Push the scanner support bar back to release it. Lower the printer unit until it is closed. Turn the printer off. Restart the computer. Turn the printer on. If the error ...
155 questions posted
Usually answered in minutes!
1,869 Questions
1,438 Questions
900 Questions
484 Questions
508 Questions
