...for one A4 size paper... please help... usually the setting to arrive at the tear off is to allow the tracter paper to arrive at the correct spot using the Top of Form using the buttons on the ...
Question about Epson Office Equipment & Supplies
...tear size. What should I do i tried paper margin setting, change printer default setting. Sounds like your top margin is not either not set properly or your documents do not have page feed command at ...
...printing a invoice 2. using tractor feeder 3.i want to print half size of A4 4.my paper got center tear option 5.after printing middle of the paper (tearing line ) should set to tear Look for a
Question about Epson Office Equipment & Supplies
tear line setting? Make sur that the paper length is correct in the settings. With paper in the printer hold down the "SHIFT" button then press the "SEL/MENU" button. The "SEL" indicatr will light up.
...tear off the invoice but when i press it again it dont go bacck too the right position. help me please cause its frustrating too turn it back maually everytime. my settings are set too factory ...
i need to set tear off option in my sato cl 408 barcode printer please help me Set dip switch 3-1 off and 3-2 on. Recycle power.(Operating mode tear off)
tear causes are: 1. Your Heat setting (Printhead temp) is too high - normal is about 10 2. You have something stuck on one of the surfaces the ribbon is contacting, i.e. a piece of label. 3. Something
Question about Zebra Office Equipment & Supplies
how to access the settings to change the top of form or tear off position I need to change the tear off position on the zebra 105se Press the front panel MODEswitch until the POSITION LED is on, then ...
Question about Epson Office Equipment & Supplies
Zebra ZTC Z4Mplus-200dpi Label is not pushing label all the way out which tears a bit of the top when taking the label. backfeed is set to before but still no change. tried other backfeed settings, ...
...Tear Off button again to return to the Top of Form. I don't know if someone accidentally changed a setting or something but now the printer feeds after printing as if the form were 11" in length. The ...
227 questions posted
Usually answered in minutes!
1,911 Questions
664 Questions
510 Questions
438 Questions
454 Questions