Question about Canon PIXMA Office Equipment & Supplies
two lights blink and p2 flashes. it cant even initialise Error No. P2 is a problem of Scanner board... kindly change your scanner board... it may help your problem... thanks.
...but just some general tips. The Scan button will only work if you have installed a suitable scanner based software packed on your computer. As a general rule this is the Navigator software
Question about Canon PIXMA Office Equipment & Supplies
...hi, CANON PIXMA MP160 All-In-One InkJet Printer has few common problems. Such as Driver CD lost, Scanner does not work, Connection problem etc. For find all these software solution just click
...Scanner not initialising completely, 2. Scanner Lamp not on 3. Error Codes "E2 & 20" on Copy 4. Paper is fed partially, I have check the Lamp and it is not blown (10 Ohms) I have visually check the ...
...initialising it is showing scanner error 6 switch off and on ,but it doesnt work what will be the solution for this most likely dust on the scanner optics causing scanner to be unable to go to home ...
Question about Konica Minolta Office Equipment & Supplies
file initialising" when trying to scan? My konica 7228 printer / scanner copier comes up with the following "please wait file initialising" when trying to scan? There is some network problem
Question about Toshiba Office Equipment & Supplies
...PLEASE WAIT upon switching on and it stays like that without becoming ready. when you remove the scanner upgrade kit, the machine powers on to ready, and you can use it as a copi Isolating scanner ...
...is making a louder noise than usual while printing. Like maybe a motor or wheel or something? scanner unit initialises on power on condition. scanner unit moves to right extreem end and makes ...
C4388 scan through wifi? when I try to scan using my HP C4388, the computer says, "scanner could not be initialised (scanner not found)" and on the printer it says, "you are not connected USB or ...
can get no further. I can however print from my Macbook but cannot scan. When I try to scan it says scanner not initialised. If I hit the scanner button, the On light flashes for 20 seconds then stops
541 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
