...copier the copy comes out but its crooked. (not aligned) Pull all of the paper out of paper tray and reload. More than likely you will find some sheets on the bottom that are folded at the corners. ...
Question about Canon Office Equipment & Supplies
my kodak esp 3 is chewing up paper and pulling it in crooked? The paper is pulled in crooked and it then jams and Ihave to clear it from the back. how are the rubber rollers spposed to relate to the ...
prints crooked The paper is not being pulled into the printer straight. There are small sliders that rest next to the paper in the loading tray, you are required to push these so that they slide over ...
crooked copies Faxes and copies are printing crooked. Tighten the fences and guides that hold the paper in place. If the paper is not snug in the tray, it will not pull through straight.
Question about Canon Office Equipment & Supplies
THE PAPER IS BEING PULLED CROOKED INTO THE PRINTER Make sure something hasnt fallen into the printer like a paper clip or something. I had that happen and was experiencing the same problem. Something ...
Question about Muratec Office Equipment & Supplies
...pulls the paper crooked when feeding. check ADF rollers and re-feed pads.(maint cycle approx.50~80K) Also check ADF is square on copier..sometimes people push on ADF when moving machine and get ADF ...
...crooked. The left side pulls in but the right side of the paper feeds slower (or not at all, I'm not sure) This is a new printer that worked right for about a month. Defective rollers or you have ...
Question about Copystar Office Equipment & Supplies
...copier remains inoperable. Prior to the codes appearing, the top feeder would pull papers in crooked even though they were lined up perfectly in the feeder tray. what do E310 mean on a panasonic ...
copier. I have to address medium-stock envelopes measuring 8.25" x 6". When I put them on the tray to feed into the printer, there is only one roller pulling it through and it inevitably goes crooked.
paper is pulled through crooked printing is not straight. how doyou clean the rollers? This can be caused by several factors. It could be that there's something(like small foreign objects in the paper
281 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions