Canon MX700 Office All-In-One InkJet Printer "remove blur" Questions

...out the encoder from my Xerox 8560 so that I can clean it and stop getting blurred images. How do remove it? You don't need to remove it. Remove the right cover, and the fan on that side. Partially ...

...is blurred nothing so far what should I do ? Blurred print may be caused by a dirty print-head - remove and wash with clean warm water. Dry with paper towel and retry. Blurred print may also be ...

...blur..its alternate till end of printing..please help me..how can i fix this problem?... Replace the ink cartridge. The cartridge is so wide that it can print 2 lines at a time, and the upper part of ...

Incoming fax blurred and incomplete. Can the Incoming fax blurred and incomplete. Can the print bar be replaced? The bar can be replaced but usually the blue lever on the right and left of the bar ...

is it correct? the blur can be caused by a dirty LASER UNIT remove all the cartridge clean properly the two laser unit. if need another help i'm here and tell me me if your problem was resolved or not

...and once its gets contaminated it causes the drum to run the wrong speed. What you have to do is remove the right cover, looking from the front. Then locate the drum. Its about mid way back on the ...

...drum has ran off over the drum encoder position sensor. Take the right cover off and find the fan. Remove it and loosen the clear plastic sensor cover underneatch. Clean the sensor and generally

How do I find Drum Encoder Disk on a Xerox 8560? I'm getting random blurring To find the encoder, remove the right cover and remove the only fan on that side. Loosen the clear cover and clean the ...

...missingtried head cleaning many times still not much better. What else can I do? Can printhead be removed &cleaned?how do I go about this? The following may work: remove all the ink supplies. ...

Only the black ink is printing blurred? Remove the black cartridge and gently clean the jets.