Canon MX700 Office All-In-One InkJet Printer "dial 9 send fax" Questions

...dial 9, then fax number. However, when sending out the fax, our phone system doesn't grab the trunk fast enough (when dialing 9) and the subsequent fax fails. Is there a way to configure the 5610 to ...

...dial '9' to get an "outside" line from your business telephone system, be sure that to program both a '9' and a 'comma' (to tell the FAX to "wait" slightly after dialing the '9', in order to get a ...

...9 Press . 10 If the printer is not set to the 24 hour mode, press or repeatedly to select AM or PM. 11 Press to save your settings. 12 Enter a fax number, or press Phone Book to select a number from ...

dial the fax no. ( wait for call connection and here the fax Rx. tone) press START. To receive a fax two procedure can made, manual- lift a hand set of telephone receiver on incoming ring, here the TX

dial entries, and specify menu items. 7 Fax Resolution: use to set the fax resolution to Fine, Standard, 300 dpi, or Photo. It will remain at the most recent setting until changed. 8 Start Fax - Black

...dial 9 or 0 before the number to get external line. Please connect the telephone cable in the Rj11 connector in the fax and try to dial any of the telephone (mobile) number and check is it ringing or ...

...dial 9-1 before the area code when faxing? Hello, If you are in an office or corporate environment where the phone system is on a PBX you need to dial 9 usually to get outside the office. If you just ...

...steps taken in sending a fax,.but it always comes back with a fax report that "no answer" and threfore its been cancelled...pls help... how do i stop the # 9 from coming up first when I dial a fax

...send out. do i need to program my fax? If you've changed to VOIP you might have to set some of the parameters in your VOIP terminal adaptor to allow faxes. Also check whether you need to dial 9 or ...

...dial 9 before dialing out? This is pretty simple, but I can't find the answer anywhere online. When dialing out do I need to dial 9 first? I have tried it both ways and am getting a "no answer" ...