Mitac Mio P550 Pocket PC "connect device" Questions

...a car charger, instead of using the PC. (I use official Mio car chargers). You have to have an ignition switch on, only then to connect a device. It is to protect device against an electric shock. ...

...device). firo it just happened to me, ran out of batttery while GPS is on, then no matter what i did, the screen is just blank, after some searching, i fixed it with the following step: 1. REMOVE the ...

...is that it won't start up at all. The start up screen comes up but it won't initialize. I've tried connecting to the computer but because it won't startup the computer won't read it It sounds like ...

...connect to a cd player or another device. The problem is that the 3.5 mm audio jack is the commonly available one and the mio has a 2.5 mm jack. I have tried 3 different adapters (2.5 to 3.5) and I ...

...device works ok but when the battery was getting low there was a warning to connect but i do not get this any more the machine closes and have to use backup to get programes back, allso when looking ...

...connect PC to the Mio, goto windows of the device startup folder and remove the file welcome.exe. After a reboot the calibartion check will not show at startup. Problem is that the touch panel is ...

...preferred connection and connect your device. Often times wireless broadcasts have passwords after connecting follow the prompts and you will be directed through. Hope this solution has been

...device . Connect to USB Modem (Like Reliance DataConnect, TATA Photon, IDEA Netsetter etc.) ability to connect to any locked/unlocked USB internet Modems (Zero Devices) fully automated connection ...

...connect your device to the PC using a USB cable. The WMDC should detect your device and attempt to connect with it . If your device is locked, a popup will appear asking you to unlock the device if ...

...device, you can connect through bluetooth with this procesure : step one: set up a bluetooth COM port : 1- Open the Bluetooth Devices Control Panel. On the Options tab, select Turn discovery on and ...