HTC Touch P3450 Smartphone "battery screwed screen" Questions

...screen to the main board is faulty. Try to open up the phone, by unscrewing it open from the back, then locating the ribbon and either try to reconnect it or replace the ribbon with a new one. Remove ...

...battery. After changing it my touch screen was frozen and the power switch would not work. So I googled the issue and it brought me to this forum. I saw dlzalkin's answer about loosening up the four ...

screen. Here is a detailed step on how to dissassemble your P1i; STEP 1 Tools required: Torx 6 screwdriver, Phillips size 0 screwdriver First remove the battery cover, battery, memory card and stylus.

...battery towards the screen. The screen may pop out but don't worry about it. You can put it back later. Remove the battery by pulling up on the battery clip and a bit of your imagination. using a ...

screen is black Try reset by holding power+home buttons for at least 10 sec. If not fix unscrew the back cover then take off battery connector for some minutes then put back see if solve,back cover is

...screen. Ebay, and various online retailers have them for around $40. You can do it yourself if you try. To replace, you need a micro phillips head screw driver and a T-6 torx screw driver. Also ...

screen and beneath that is the LCD display. Be certain to order the correct piece. To replace, you need a micro phillips head screw driver and a T-6 torx screw driver. Also patience, and a steady hand

...Screen I have read your solution, i took the battery out and the cover off, now i am confused as i dont see any clips at all. Could you please help and tell me where it is located and it would be ...

...battery from receptacle on circuit board. 5) Remove front screen by pressing a screwdriver against the small metal tags that follow the edge of the screen. The tabs need to be pushed in slightly to ...

...battery. Turn the fone over and remove the front cover with your screw driver, pull off the front cover and afirm the LCD screen very well to the panel of the phone, recouple back to test, if it is ...