Pyle 1800-Watt 2-Channel Bridgeable MOSFET Amplifier Car Audio Amplifier "bridge dual voice coil" Questions

...dual???? If its a single, just bridge sub to amp....(+ of one channel and the - of the other) amp should show where to bridge with a diagram near speaker outs. If its a dual voice coil, then run one ...

...bridge it it blows the fuse in the amp. It works when the radio is not loud but as soon as I turn it up it blows the fuse. Wondering if you had any ideas on how to fix it? Thanks for your time. You ...

...bridge it will be 3 channel or 2 channel. If you are running a dual voice coil sub then you can wire the amp two channel and get 400 watts x 2 @ 4 ohms. Make sure that you sub can handle this kind of ...

...dual 4 ohm speaker which config will i get the most power out of the amp. Wired at 8ohm bridged or each voice coil on a channel. That amp wont run bridged at 2ohm rite. You are correct, the amp will ...

...dual 4ohm voice coils . can i run his amp in 4 ohm bridged and run it with 1 coil to one side and the other coil to the other side .so that will be 1/ 2 bridged together to 1 coil 4 ohm and 3/4 ...

...bridge it for 600x1@4ohms and the manual shows if I hook each speaker separately to each amp channel it will run 2ohm(stereo). How do I get the 150x2@4ohm(mono)?? OK what you are saying now is that ...

dual 4 ohm voice coils in parallel, tie 2 subs in series (one "+" to the other "-"), and bridge the two channels of the amp (aka put them in parallel). But this, also, would be about 200W on each sub.

...If your amp only runs at 4 ohms mono. Don't bridge it down o 2 ohms mono. If you have dual voice coil subs. bridge the coils of the subs in series, then bridge the two subs outside the box

...in 4 ohm Mono that's 450 x 2 to give you 900 watts of power.2, 2 ohm dual voice coils ran in series and bridged on the amp for each sub.Otherwise, Single Voice Coil 4 ohm subwoofers bridged to

...dual voice coil) and each voice coil is 4 OHM or 2 OHM, then you can connect one voice coil to one channel of the amplifier and the other voice coil to the other channel of the amplifier. If it is a ...