...but gets lower as amp light dimms. What's going on. Also I have a boss 20 ferret power cap. Short circuited component/s at amps' audio output stage circuit. Contact any service technician to get it ...
...no additives and a brand new tooth brush. Very carefully and slowly pour alcohol on the processor circuit board. Now dip the tooth brush into the alcohol and brush the circuit board. Then blow the ...
My kenwood K25cb12 cuts out & blows the fuse on circuit board, is it repairable? Thanks Check and replace damaged component/s at its main power amp section circuit. Contact any service technician. ...
...dual voice coil subs in a parallel, series, alternating config, for a total of 2 separate parallel circuits, wired together in series (series is positive from one circuit, or driver, to the negative ...
Question about Alpine Car Audio & Video
...it was the output transistors, i have changed them, and for one of them, when i test them in-circuit, the transistor measures lower with a multimeter and even if i take out the transistor, it ...
...the stereo doesn't work. The stereo is 4 months old. If water did get into the cover of it the circuit board may have got condensation inside and on it. There is no way to tell if there is ...
fuses if i use 2 20 amp fuses, will that be 40 amp? what about circuit breakers, i dont see too many on 12 v.d.c. apps? THANK YOU. If you connect the fuses in parallel yes. You can use 12v circuit ...
Question about Power Acoustik Car Audio & Video
...mode all wire are ok what could it be inside the amp that making it do this HelloAny one channel circuit of the amplifier has any sort of trouble, the amp will go to protect mode. It may be a ...
Question about Pioneer Car Audio & Video
...ins. If it does blows off fuse; as soon as it is switched ON; either its mains rectifier section circuit; or its audio output section circuit will have any kind of short circuit. Contact any ...
60 questions posted
Usually answered in minutes!
1 Questions
1 Questions
1 Questions
1 Questions