...water in it to pump it up to the top. It is also possible that the pump has debris in it that is restricting the flow. Clean out the screens and check the bottom of the washer tub for debris at the ...
...water is in the bottom of dishwasher. Yes I had the same problem and just fixed it for $7.00. Did not even had to take anything apart. This is what you will have to do. If this dosen't work then try ...
...bottom wash arm spins fine, as does the one under the top rack, but the very top one on the inside 'ceiling' of the unit that runs water over the top of the top rack does NOT turn. I pulled out the ...
...bottom of the door..on the INSIDE of the machine.It's amazing how much "gunk" settles and accumulates under there. I use an old toothbrush, moistened in soapy water to scrub the underside of the ...
...water with voids or bubbles in it) which causes all kinds of nasty noise. In my machine, there is a food grinding blade at the bottom, then above it, a metal grinder plate with holes in it and above ...
...water from the base. If the unit works fine after resetting the power/breaker it can likely be chalked up to a drain back-up or obstruction in the drain hose or pump. If not, there are a couple of ...
...pouring in an extra half-gallon of water after it started filling hypothesizing that perhaps the fill valve was shutting off too soon and the water level sensor, if there is one, thought there wasn't ...
...water-inlet valve is often to blame. This valve is usually at the bottom left or right of the dishwasher, behind the lower access panel. It's the device with the main water line from the house, a ...
...bottom of the door..on the INSIDE of the machine.It's amazing how much "gunk" settles and accumulates under there. I use an old toothbrush, moistened in soapy water to scrub the underside of the ...
239 questions posted
Usually answered in minutes!
438 Questions
252 Questions
192 Questions
117 Questions
100 Questions