Peavey VTB1 1-Channel Amplifier "knob" Questions

Knob for NAD amp? I'm looking for a knob for a NAD 3130 amp. Any ideas? Hi... try your "local" NAD seller and ask them? Contact NAD by email. or www.audiokarma.org 100's of users someone there should ...

how do you remove the knobs on a nashville 1000 they are creating stactic General knob removal is look at the knob all the way around and see if there is a hole, if there is, its got a set screw in it

Deneon PMA-250 amplifier -Volume knob not working correctly Denon PMA-250 amplifier -Volume knob not responding correctly, high volume on low setting, sometimes crackly and sometimes only works ...

loose knobs I've had this preamp for around six months, and although its sonic performance is ok, its build quality leaves much to be desired. The knobs are starting to loosen up, to the point where, ...

Volume knob broken My volume knob is broken on my TA-AV421, how can I turn my volume down first and foremost and how would I go about fixing this problem for good needle nose pliers to turn it ...

Missing Knobs on my Peavey Amp. Hi I have a Peavey xrd 680 s PLUS, which I know is a discontinued model. Over the years it has lost a lot of it's knobs. I don't want to replace it because of this as ...

...on the back of the amp than the other speaker works and the other is faint. If so, how to get the knob off the on/off switch?? I took the little allen set screw out and it still doesn't come off. I ...

pm7000 balance knob missing where can i find a spare part for a marantz pm7000. the balance knob is missing. Go to a store that fixes various electronic stuff, and you'll probably find what you ...

The radio knob turns, but the dial doesn't move probably it is a loose knob, take out the knob and put paper or any other material to increase the pressure. see it it works. otherwise glue the knod:)

Master volume on Kenwood not working - knob turns but no effect on volume is the outer of the knob actually turning the post inside the pot. if it is then maybe replace the potentiometer if it isnt, ...